If you’re like me, and most of the riders I know, you have some sort of issue with some part (of your anatomy) when riding. Sometimes it’s numbness in the nether-regions, sometimes it’s numbness in the hands, sometimes it’s burning in the feet and sometimes it’s some other nit somewhere else.
In the past I’ve dealt with several of these problems. Thanks to finding the right equipment and most importantly finding the right fit, though, that hasn’t been the case. Until recently…
Last year I ordered my first (and only) Project One bike from Trek: my boy Blue. Yup, that’s him below.

It was an awesome experience, made even better thanks to the collaboration I had with Big Daddy’s Bike, Ski & Board (aka Big Daddy’s Bike & Brew I believe) in Gardnerville, NV.
Keith and crew did an awesome job helping me pick certain parts and speccing the bike and of course they assembled it as well. We pretty much nailed it! We did the basic bike fit — you know, elbows bent, not too extended in the cockpit, knees over the spindles using a plumb line — all that stuff, and the bike felt really good. I then double checked some measurements on my Domane and tried to replicate those as best I could on the Emonda.
After several thousand miles, however, I was still getting too much numbness in the hands and so I decided to quit putting off that professional bike fit.
I had one many years ago when I lived in the Bay Area and it was during those sessions that the bike fit technician suggested (among other tweaks) that I should invest in Speedplay pedals. Those pedals allowed for more set back than most (there’s a special plate that helps).
I have really long (14.5) feet and was getting too much hot foot because, as it turns out, the spindle was in front of the ball of my foot, thereby putting too much pressure on the toes and the nerves therein. I’m still riding Speedplays today and have been able to find some Euro size 15s that are Speedplay (aka 4-hole) specific, so no more need for that extender base plate and therefore the stack height that goes along with it.
durhamcycles.com; meloqdevices.com; cyclingweekly.com; velonews.com.
Fast forward to today; last week to be more precise. After doing a bit of research I decided to go to Barton Ortho and Wellness in South Lake Tahoe, and I wasn’t disappointed.
Blue and I met with Harrison, a physical therapist and professional bike fitter. After a short interview it was on the bike for a look-see.
Harrison set up lasers to check knee alignment first and noticed my knees were coming in towards the top tube on the upstroke. We then checked my feet – yup, I’m a pronator – happens when we get older. Those arches go away. Some shims inside of the shoes and a re-check and it was much better.
We then took a look at my knee extension and seat position. Guess what? My seat was just a bit too high (we dropped it about 1/4 inch) and the nose was down 3 degrees. Both of those things made me put more pressure on the hands. And, as it turns out, that seat position was also putting a bit too much stress on the hips and lower back. Ah, that’s why the sore lower back maybe? Notwithstanding the knee issues it could cause… Seat down, nose up. Good to go.
A Bit of “Table-work”
Off the bike I got and on the table I went for a leg length and flexibility check. Both legs measured the same length so that was good. Flexibility was pretty good too but Harrison did notice some tightness in the left hip as well as the right ankle. A couple things to work on, certainly.
Next…I have a follow up appt. in the coming week and among other things I’m going to get fitted for some orthotics and report back on how things are going so far. Unfortunately, due to the smoke, I’ve not been able to ride outside but thanks to FulGaz (see last week’s post) I’ve managed to test out the new fit every day.
Here’s What I’ve Experienced so Far
While hand numbness is still there it’s MUCH LESS than it was. With my upper body size I put more weight on the bars than those of you who are much lighter and that’s not going to change. What could change, though, is my abdominal strength. Another reason it’s good to talk with a professional: I’ve been working on the lower back thinking that pain was due to lack of strength there. On the contrary, and somewhat counterintuitively, it’s my abs that need the work.
In other news…Back pain? Gone! Power? Up! Left/right balance? Better! Connection to the bike over all? Much improved! Oh, and the price? $250.00. For both sessions.
A bargain IMHO.
So if you are having some of these same botherations than you too are a candidate for a professional bike fit.
Get one and there’s no doubt you’ll be more blissful on the bike!
Let me know how it goes.
I’m gonna need to meet Haruson. Please get me the details.
Hey Chris. There is a link in the post to Barton so you can get all the info. there. I went to the Stateline location, pretty close to Kingsbury and Hwy. 50. Phone is 530-539-6600. Happy fitting!